Bainuo Brake| Brake Parts&Accessories|Spare Parts of Backing plate,Shim,Guide Spring/Rivet,Wear Censor/Indicator,Installation/Repair Kits for Brake Pad for Auto Bus&Truck OEM/Aftermarket Replacement|Chinese Leading Manufacturer,Supplier&Exporter

 

1. Daily inspection

 

Check whether the brake pads and brake discs are thin, you can use a small flashlight to observe the inspection, when the inspection found that the brake pads of the black friction material system quickly worn out, the thickness is less than 1/3 of the original thickness should consider replacing. And every 5,000 kilometers must be checked on the brake pads once.

 

2. Brake pads come with alarm pads tips

 

Some old vehicles brake pads are not connected to the car computer, but in the brake pads installed a small iron alarm. When the friction material is worn to the point of being almost gone, the brake disk is not the brake pads, but the alarm of the small piece of iron.

 

3. Brake strength feeling

 

In the end, the brakes have not become soft, in fact, as the owner of the car you know best, if the braking effect is obviously worse than before, the braking effect is obviously weakened, even if there is no alarm situation just mentioned, then I still recommend that you go to the inspection to see if you need to replace, to be foolproof.

• MENU
• PHONE
• MESSAGE